- Home
- Crane equipment
- Gantry/semi-gantry cranes
- Gantry crane 5,0 tons
Gantry crane 5,0 tons
Name of the option | Description of the option |
Load capacity limiter | It is used as an additional safety device along with limit switches and a load drop protection device in case of phase breakage. It is installed, as a rule, in cases where work is carried out with different loads, the mass of which is not always known. If the weight of the load exceeds the lifting capacity of the hoist, the limiter blocks the lifting process. The option is available for cranes equipped with an electric hoist, since the limiter is mounted on the lifting mechanism of the hoist. |
Sound and light alarms | The alarm is activated when the crane is turned on, warning employees to leave the danger zone. Depending on the conditions of the working area, it is recommended to install a light or sound alarm. The option is available only for electric cranes. |
Radio control | Allows you to control the crane from a distance using the remote control. The option is available for electric cranes or for cranes equipped with an electric hoist. The package includes a 6-button remote control with an emergency stop button, a radio signal receiver (installed on the hoist or on the crane control box or next to the control box). |
Electric motor with brake for movement | An electric motor with a movement brake is used to fix an electric crane in a resting position. Prevents spontaneous movement under the influence of wind gusts, earthquakes and other factors. |
Carport for parking hoists when performing "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
A canopy for a hoist for the entire length of the span when performed "On the street" | They are used on cranes of the placement category U1 (on the street) to protect the electric hoist from direct precipitation. It is recommended for installation by manufacturers of cranes and hoists, since the hoists themselves usually do not provide alternative protection from precipitation. |
Electric limit switches for the movement of hoists along the crane span | They are used to limit the path of the electric hoist along the crane span. |
Frequency control of the crane movement | The frequency converter is installed in the crane control unit for the possibility of adjusting the speed of movement of the crane in a certain range. It can also perform smooth start and braking. |
Engine cooling system | It is recommended to use when installing a frequency converter, which will significantly limit the standard speed of movement of the crane, to prevent overheating of electric motors. |
Heated crane control box | Allows you to operate a crane at air temperatures up to -20 g. C (inclusive). It is required to be installed on all cranes that are operated at an air temperature below -10 g. s. Requires additional installation of a frequency converter. |
Mini Gantry Cranes with a lifting capacity of 5.0 tons are used for loading and unloading operations in environments where stationary lifting equipment is not required or cannot be installed. They are widely used in construction, repair work, industry, assembly operations and specialized operations; providing efficient movement of loads in confined spaces. Mini Gantry Cranes have sufficient lifting capacity and maneuverability to facilitate and speed up work processes in a variety of industries.
As with standard gantry cranes, the main mechanism for lifting and moving loads is the telpher (hoist). The object is gripped by the hook suspension and lifted to the desired height within 6.0 meters. It can also move freely along the length of the span in the maximum range up to 5.0 m. The crane unit itself can move on a level concrete floor or on rails, if this is provided for in the project beforehand. Our plant manufactures manually and electrically operated crane units complying with the technical regulations of the Customs Union 010/2011 "On Safety of Machinery and Equipment". We also offer delivery and assembly services of crane units directly at the Customer's enterprise.
You can find more information about MCI (mobile crane installation) at: https://грузоподъем.рф/product/mobilnaya-kranovaya-ustanovka-mku.
*Image may not correspond to the stated lifting capacity.